PTH_MTH-1 pH ORP Transmitter

Product Highlights. NEW! for 2016. • PTH-1 for pH, MTH-1 for ORP/mV. • Temperature input PT100 or PT1000 sensors, isolated from pH/mV input. • Low impedance 0 – 1000mV output for temperature, isolated from pH/mV input • Internal automatic temperature compensation can be selected for pH. • Precision 4-20mA constant current output, electrically isolated from supply, signal..

PMH-2 pH/ORP/mV controller dual acting

Product Highlights. NEW! for 2016. • Operate as a pH or ORP/mV controller. • 240VAC/5A relay outputs easily connected via 3 way terminal strips. • Alarm output with high and low set point. Potential free relay contacts. • Fully isolated 4-20mA current output. • 4 – 20mA signal output, programmable over entire 0 – 14pH..

DPH-4 pH/ORP/mV Dual controllers

Product Highlights. Dual separate instruments to measure and control pH and ORP levels within the one instrument. Select above/below control actions for pH & similarly for ORP/mV. Ideal for swimming pools, processing plants or any installation requiring dual measurement and control of a process. Configuration and calibrations are entered with easy to use rotary encoders. Signal range and loop..

DPH-64 pH/ORP Controller dual acting

Highlights. NEW! For 2016. • Operates as a pH or ORP/mV controller. • 4 setpoints for controlling 4 relays plus 2 proportional pulsed outputs. • Configurable Temperature compensation. • Fully isolated & programmable 4-20mA current output. • Inbuit realtime clock. • Inbuilt help assist menu. • Easy calibration and setup.

SMH-2 pH/mV/ORP Meter and Simulator

Product Highlights. • Efficient troubleshooting through the use of pH and mV simulations. • High impedance electrode simulation to quickly isolate cable/input faults. • Meter function to test and evaluate electrode performance • Simulation function to test controller operation, selected setpoint operations, drive connected dose pumps/alarms and confirm correct calibration. • Sweep only part of the pH or mV range for..

PPH-1 pH Controller Single Action

Highlights. DISCONTINUED, refer to PMH-2 for replacement. • 0 – 14pH input range, 0.01pH resolution. • A single 240VAC/5A relay output is provided for dosing, easily connected via 3 way terminal strip. • Alarm output with programmable High or Low setpoint, potential free contacts. • Fully isolated 4 – 20mA current output. • 4 – 20mA signal output, programmable over..

PMV-1 ORP/mV controller single action

Product Highlights. DISCONTINUED, refer to PMH-2 for replacement. • 0 – 1000mV input range, 1mV resolution. • A single 240VAC/5A relay output is provided for dosing, easily connected via 3 way terminal strip. • Alarm output with programmable High or Low setpoint, potential free contacts. • Fully isolated 4 – 20mA current output. • 4 – 20mA signal output, programmable

CTH-2-6T Cooling Tower Controller

Product Highlights. DISCONTINUED • Dual Biocide actions, individually programmed for start time and duration. • Pre-bleed feature for both biocide cycles. • Inhibitor dosing after the bleed cycle option if required. • Proportional dosing of inhibitor (option if selected). • Manual override of all functions for priming pumps. This feature is easily accessed directly with buttons on..